Part Number Hot Search : 
12000 F2001 ISL62 58X25 P72804S2 25LC0 100FC 200CA
Product Description
Full Text Search
 

To Download EC-1019 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
HIGH LINEARITY BROADBAND AMPLIFIER
Features
DC to 6 GHz 18.5 dB Gain at 1000 MHz 19 dBm Output P1dB at 1000 MHz 34 dBm Output IP3 at 1000 MHz 5.5 dB Noise Figure at 2000 MHz
Applications
Broadband Gain Blocks High Linearity Amplifiers
Packages Available
(-B) SOT-89 (-C) 85 Mil Micro-X
Description
The EC-1019 is a high reliability, high linearity, low cost broadband amplifier, optimized for commercial communications. The device is manufactured using in-house developed, advanced Indium Gallium Phosphide Heterojunction Bipolar Transistor (InGaP HBT) technology and is designed for use as a 50 Ohm gain block. The amplifier features excellent VSWR, low noise figure and highly linear performance. Typical OIP3 is +34dBm at 1000MHz. The EC-1019 operates from a single voltage supply and requires only two DC-blocking capacitors, a bias resistor and an inductor for operation. The device is ideal for wireless applications and is available in a low cost, surface-mountable plastic 85 mil Micro-X and SOT-89 packages.
Electrical Specifications
Test Conditions: Ic = 70 mA, Ta = 25 C
SYMBOL F G G P1dB PARAMETER Frequency Gain (Small Signal) Gain (Large Signal) Pin = +4.0 dBm Output Power @ 1dB Compression Saturated Output Power
f f f f f f f f f f f f f f = 1000MHz = 2000MHz = 3000MHz = 2000MHz = 3000MHz = 1000MHz = 2000MHz = 3000MHz = 1000MHz = 2000MHz = 3000MHz = 1000MHz = 2000MHz = 3000MHz
o
MIN. DC
LIMITS TYP. 18.5 16.5 14.5 15.5 13.5 19.0 19.5 17.5 20.0 21.0 20.0 34.0 31.0 30.0 19.0 15.0 5.5
MAX. 6000
UNIT MHz dB dB
TEST CONDITION
14.0 12.0
Psat
dBm
OIP3 RL in RL out NF Vde
Output Third Order Intercept Input Return Loss, 50 Ohm Output Return Loss, 50 Ohm Noise Figure Device Voltage
dBm dB dB dB 5.2 V
Note 1
f = 2000MHz f = 2000MHz f = 2000MHz
4.2
5.0
Note 1: OIP3 = Pout (by power meter, total 2-tone power) + (IM3(dB))/2) - 3dB
CAUTION!
SENSITIVE ELECTRONIC DEVICE
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
1
PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
HIGH LINEARITY BROADBAND AMPLIFIER
Absolute Maximum Ratings
Device Current RF Power Input Operating Temperature Storage Temperature Junction Temperature 130 12 -40 to +85 -65 to +150 200 mA dBm C C C
Note: Exceeding any of the absolute maximum ratings may cause permanent damage to the device.
Micro-X Package Outline
(all units are in inches)
.014 to .026" .094 to .106"
1 2 3
.086 to .098"
4
.017 to .023"
.075 to .095"
.052 to .068" .021 to .031" .004 to .008"
Pin Definitions
Pin # 1 2, 4 Definition This pin has a nominal 50 ohm input impedance. It requires a DC blocking capacitor RFin large enough to handle the lowest frequency used. The two ground connections should be directly connected together to the ground plane Gnd on the PCB. This pin has a nominal 50 ohm output impedance. It requires a DC bias of 70mA typically through a series inductor/ resistor pair. Using a bypass capacitor (0.01 RFout micro Farad) on the DC side of the the series inductor/ resistor is also recommended. Use a DC blocking capacitor on the output with similar requirements as the input side. Pin
3
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
2
PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
HIGH LINEARITY BROADBAND AMPLIFIER
SOT-89 Package Outline
(all units are in inches)
Symbol A B B1 C D D1 E E1 e e1 F H
Inches MIN. MAX. .055 .017 .014 .014 .173 .064 .090 .084 .059 .118 .035 .155 .047 .167 .063 .022 .019 .017 .181 .072 .102 .090
Pin Definitions
Pin # 1 2, 4
3
Definition This pin has a nominal 50 ohm input impedance. It requires a DC blocking capacitor RFin large enough to handle the lowest frequency used. The two ground connections should be directly connected together to the ground Gnd plane on the PCB. This pin has a nominal 50 ohm output impedance. It requires a DC bias of 70mA through a series inductor and a resistor. A bypass capacitor (1.0 micro Farad) on the RFout DC side of the inductor is recommended for providing instantaneous current during a modulated RF signal. Use a DC blocking capacitor on the output with similar requirements as the input side.
Pin
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
3
PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
o
HIGH LINEARITY BROADBAND AMPLIFIER
Typical S-Parameters: Vde = 5.0V, Icc = 70mA, Temperature = 25 C
Frequency (MHz) 100 250 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 S11 (Mag)
0.1366 0.1386 0.1372 0.1324 0.1201 0.1087 0.0976 0.0955 0.1083 0.1319 0.1687 0.2155 0.2628 0.3188
S11 (Ang)
-2.271 -5.111 -10.411 -23.163 -38.163 -59.401 -85.134 -116.073 -148.51 -175.599 161.937 142.398 126.047 111.475
S21 (Mag)
10.4184 10.2799 9.9637 9.0971 8.0788 7.1965 6.3693 5.6849 5.1244 4.6624 4.2386 3.8801 3.5234 3.1812
S21 (Ang)
175.001 167.334 155.093 132.705 112.717 94.955 78.762 64.356 50.134 36.769 23.493 10.371 -2.967 -15.408
S12 (Mag)
0.0725 0.0724 0.0736 0.0768 0.0823 0.0903 0.0979 0.1065 0.1154 0.1240 0.1323 0.1396 0.1450 0.1488
S12 (Ang)
0.005 1.952 4.133 7.466 9.848 10.966 10.329 8.874 5.636 1.899 -2.8 -8.334 -14.354 -20.52
S22 (Mag)
0.1873 0.1865 0.1846 0.1802 0.1756 0.1744 0.1763 0.1886 0.2113 0.2449 0.2868 0.3366 0.3841 0.4352
S22 (Ang)
-7.367 -17.713 -34.976 -66.222 -93.817 -120.646 -144.965 -168.422 169.493 151.452 136.312 123.238 111.666 100.938
Please follow the link on website page "http://eiccorp.com/products/gain.htm" for detailed s-parameter to 6.1 GHz.
Reliability and Burn-In Test
EiC performs burn-in for selected lots on a regular basis to monitor and guarantee consistent product quality and reliability. The burn-in process consists of pre-conditioning (JESD22-A113-B), pre and post RF tests, and bias life (JESD22A108-A). The table is based on the following parameters and conditions: Activation Energy: 1.85eV Junction to Ambient Temperature Difference: +45oC Confidence levels of 60% and 90% are used to calculate FIT (Failure In Time), for the maximum operating ambient temperature at +85oC.
Test Temp Hours Completed Quantity Tested +145C 1000 80 +125C 1000 20 Cumulative FIT @ 60% Confidence Level Cumulative MTTF @ 60% Confidence Level (FIT 11) Cumulative FIT @ 90% Confidence Level Cumulative MTTF @ 90% Confidence Level (FIT 28) Quantity Failed 0 0 11 8.98E+07 Hours 28 3.57E+07 Hours
EiC will update the burn-in and cumulative FIT results periodically. Please check the website at www.eiccorp.com
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
4
PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
HIGH LINEARITY BROADBAND AMPLIFIER
Evaluation Board Schematic 85 Mil Micro-X and SOT-89 Recommended Bias Resistor Values R = (Vcc-Vde)/Icc = (Vcc-5.0)/0.070
Supply Voltage (Vcc ) R1 (Ohms) 6 15 7 30 8 43 9 56 10 68 11 82
Evaluation Board Layout
Evaluation Board Materials
MANUFACTURER MARU MARU ROHM DIGI-KEY EF Johnson EiC Corp EiC Corp PART NUMBER CE101J1NO CE105K1NR Various TKS2386CT-ND 142-0701-881 EC-1019 60-000009-003B QTY. 2 1 1 1 2 1 1 DESCRIPTION Capacitor (0603) Capacitor (0603) Resistor (0805) Inductor (0603) SMA Connector Amplifier Printed Circuit Board VALUE 100 pF 1.0 uF Depends on Vcc (See Table) 100 nH DESIGNATORS C1, C2 C3 R1 L1 J1,J2 U1 ---
1. EiC RECOMMENDED COMPONENTS ARE SHOW. EQUIVALENT COMPONENTS MAY BE USED. 2. LARGER VALUES GIVE BETTER LOW FREQUENCY RESPONSE(<500MHz) NOTES: UNLESS OTHERWISE SPECIFIED
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
5
PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
HIGH LINEARITY BROADBAND AMPLIFIER
Figure 1
Icc vs. Vde
160
120
Icc (mA)
80
25C 85C -40C
40
0 0 1 2 3 Vde (V) 4 5 6
Figure 2
P1dB vs. Frequency
24
20 P1dB (dBm) 25C 85C -40C 16
12 0 500 1000 1500 Frequency (MHz) 2000 2500 3000
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
6
PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
HIGH LINEARITY BROADBAND AMPLIFIER
Figure 3
Gain vs. Frequency, T=25oC
25
20
15 S21(dB) 10 5 0 0 1 2 3 4 5 6 7 Frequency (GHz)
Figure 4
S11, S22 vs. Frequency, T=25oC
0
-5
S22
S11, S22 (dB)
-10
-15
S11
-20
-25 0 1 2 3 4 5 6 7 Frequency (GHz)
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
7
PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
HIGH LINEARITY BROADBAND AMPLIFIER
Figure 5
Reverse Isolation vs. Frequency, T=25oC
0
-5
-10 S12(dB) -15 -20 -25 0 1 2 3 4 5 6 7 Frequency (GHz)
Figure 6
Noise Figure vs. Frequency, T=25C
12
8 NF (dB) 4 0 0 500 1000 1500 2000 2500 Frequency (MHz)
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
8
PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
HIGH LINEARITY BROADBAND AMPLIFIER
Figure 7
O I vs.Fr P3 equency
40
35 Output IP3 (dBm)
30
25C 85C -40C
25
20 0 500 1000 1500 Frequency (MHz) 2000 2500 3000
EiC Corp. reserves the right to change specifications without notice. Copyright (c)1998 EiC Corp. All rights reserved. All EiC Corp. product names are trademarks or registered trademarks of EiC Corp.
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
9
PRODUCTION DATA SHEET
EC-1019
DC - 6 GHz
HIGH LINEARITY BROADBAND AMPLIFIER
APPLICATION NOTES
Please visit our website at www.eiccorp.com to view or download the following documents. You may also call our Customer Service to request a hardcopy. Document # AP-000192-000 AP-000194-000 AP-000487-000 AP-000515-000 AP-000516-000 Description Discussion of Technology and Reliability Enhancements Biasing and Performance Enhancements Tape and Reel Specifications and Package Drawings Voltage Spike Suppression Application Note Index
EiC Corp. A Subsidiary of EiC Enterprises, Ltd.
45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999
www.eiccorp.com
Fax: (510) 979-8902
SS-000115-000 Rev K
10


▲Up To Search▲   

 
Price & Availability of EC-1019

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X